DPP-140H Aluminum Plastic Blister Packaging Machin

1. Simple Introduction: The machine is new product which is improved based on customer’s requirements. It’s suitable for packaging of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.2. Feature:1. Travel scope can be adjusted.2. DPP-140H is the smaller type of DPP-250H, so the electronic part and pneumatic part is the same, but overall dimension is different.3. Mould is located by locating groove which makes it easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.4. The material is fed automatically. The mould and feeder can be designed as user’s requirements.5. Speed is shifted by step-less transducer. Adopt the interface of Touch panel with microcomputer programmable controller.6. Adopt the equipment of trace pressing, batch numberpress and scarp-collecting.7. Manipulator grip to tow wrapper, straight to-and-fro running. Synchronize accurately. .3. Main Technical Data:Model:DPP-140HBlanking frequency (sheets):15-60Capacity (sheets/hour):1-2(according to your product size.)Adjustable scope of feed travel: (mm) 1800-7200 (If there are 10capsules/blister, it can reach 72000capsule/hour.)Max Forming area and depth (mm) PVC (For medicine):170×120×25 (depend on your product size.)Capacity of air compressor(m3/min) ≥0.36Power supply (KW): 380V 50HZ 5.5KW (it can be changed by your requirement)Wrapper specification (mm): PVC for medicine 140× (0.15-0.5)PTP Aluminum film 140× (0.02-0.035)Overall dimensions (mm): 1700×450×1200Weight (kg): 950Kg